Home News Smallest diameter cutting, stapling device available

Smallest diameter cutting, stapling device available

Contract Manufacturing, Industry News, Design, FDA, Components, Devices, Surgical Instruments

Cardica receives US FDA 510(k) clearance for MicroCutter XCHANGE 30 cutting/stapling device.

Font size
Manufacturing Group January 15, 2014

Cardica Inc. obtained 510(k) clearance of the MicroCutter XCHANGE 30 device and blue staple cartridge for medium thickness tissue from the U.S. Food and Drug Administration (FDA) for use in multiple open or minimally invasive surgical procedures for the transection, resection, and/or creation of anastomoses in small and large intestine, as well as the transection of the appendix. The XCHANGE 30 is the smallest diameter cutting and stapling device available today, with articulation up to 80° and single-handed operation. 

"We are extremely pleased to achieve this important corporate milestone, allowing us to market the MicroCutter XCHANGE 30 in the United States," said Bernard A. Hausen, M.D., Ph.D., president and CEO of Cardica. "We have been working with leading European surgeons in a commercial setting over the past year to optimize this device for use in both open and laparoscopic procedures. We look forward to implementing a selective commercial launch in the United States in the months ahead to address the growing need for a smaller surgical stapling device. Looking beyond the initial introduction, we plan to submit our 510(k) premarket notification for the white stapling cartridge for thin tissue and blood vessels also used with the XCHANGE 30 device, in the current quarter, to further expand the device's applicability in surgical procedures."

The clearance of the XCHANGE 30 and the blue stapling cartridge for medium thickness tissue is based on data submitted from Cardica's European clinical trial to evaluate the XCHANGE 30 in a variety of gastrointestinal surgical procedures. The XCHANGE 30, with a 5mm shaft diameter, met the primary endpoint of non-inferiority to a 12mm stapler, with only one device-related event in 160 enrolled patients with 423 deployments. 

"Over the course of the last decade, surgical tool size has trended down substantially to allow for less invasive surgical procedures with better patient outcomes," said Juan-Carlos Verdeja, M.D., F.A.C.S., associate professor of surgery and director of laparoscopy and minimally invasive surgery at Florida International University Herbert Wertheim College of Medicine. "The MicroCutter XCHANGE 30 meets the need for increasingly smaller surgical tools, and provides a significant and needed innovation. This device can now be used with a smaller trocar, particularly important during surgical procedures where multiple angles are helpful for an approach to an organ."

The MicroCutter XCHANGE 30 is a cartridge-based, minimally-invasive stapling system with a 5mm shaft diameter and cross sectional area significantly smaller than 12mm conventional staplers, and with greater articulation. The size and degree of articulation enhances the surgeon's access and visualization at the surgical site. Combining several new technologies, this device is designed to mitigate limitations on surgical procedures created by larger stapling devices. As the smallest profile stapler available today, the device may reduce the amount of tissue dissection and handling to get the stapler in proper position to fire. The XCHANGE 30 uses reloadable cartridges with a 30mm staple line length and an integrated knife and is currently indicated to fire up to six times per device. 

Source: Cardica Inc.

 

Add a comment:

 

Post Comment
* TMD - Today's Medical Developments reserves the right to edit or remove reader comments for any reason it deems appropriate.